9”/23cm heat sealed Umbro numbers on jerseys available in: navy, white, emerald, black, red and gold.
4"/10cm heat-sealed numbers on shorts are only available in black and white.

DEFAULT NUMBER COLOURS:

WHITE	Vermillion, Royal, Navy/Gold Half, Emerald/White, Navy/White
NAVY	White/Navy, Sky/Navy, White/Sky Half, Titanium, Sky/White Stripe, Gold/Navy and Sky/Navy GKJs
SKY	Maroon/Sky
EMERALD	Yellow/Emerald/Royal
BLACK	Vermillion/White Half, White/Black, Gold/Black, Yellow/Black, Vermillion/ White Stripe, Royal/White Stripe, Fiesta/Black, Sulphur/Black, all GKJ except Gold/Navy and Sky/Navy
GOLD	Maroon/Royal Half, Maroon/Royal Stripe, Vermillion/Black Stripe, Navy/Gold
ROYAL	Yellow/Royal
SILVER	Royal/Black Stripe, Black/Royal Half

Prices	1 colour
Jersey Numbering	£2.50
Short Numbering	£2.00

You can now order Numbers to be applied on your Team Kit Jerseys/Shorts.
CLICK HERE

 

There are five designs to choose from. Alternatively, if appropriate artwork is provided, bespoke club badges can be produced.

Standard Badges:

                

Prices	1 colour	2 colours	3 colours	4+ colours
Standard Badge	£2.00
Customer's own artwork
Heat Seal Badge	£2.50	£3.25	£4.00	£5.75
Embroidered Badge	£3.00	£3.75	£4.50	£6.25
Embroidery Set up	£25.00	£25.00	£25.00	£25.00

You can now order Team Badges to be applied on your Team Kit Jerseys.
See Badges

 

There are six font styles to choose from.
Please note that sponsors logos cannot exceed 200cm2 (as per FA regulations).
As with club badges, if appropriate artwork is provided, bespoke sponsors logos can be produced.

Standard Sponsor Fonts:

       

Prices	1 colour	2 colours	3 colours	4+ colours
Standard Heat Seal Logo	£3.00
Customer's own artwork
Heat Seal Logo	£3.50	£4.00	£4.50	£6.25

You can now order Sponsor Logos to be applied on your Team Kit Jerseys.
See Sponsor options

 

Heat-seal transfers are lightweight and cause no irritation next to skin garments. Embroidery on the reverse side (next to skin) can potentially cause chaffing.
Please make sure that you have asked permission to use any registered trademarks. Umbro cannot accept any responsibility for infringement of any third party intellectual property rights.
Umbro reserves the right to refuse to print any offensive and/or unacceptable name or logo.

All artwork supplied needs to be in eps or illustrator format via email, computer disk or cd rom. The pantone shades of colours must also be provided where possible.

You can customise your Team Kit Online. Once you have orderet your Kit - go to Modifications section, and follow instructions (three simple steps). Modifications will be added to the basket as separate item. It is reccomended to add only one modification of one type per order. Link to Modifications section is also displayed on the bottom of "Your Basket" page.

alternatively you can send your completed order form (and artwork discs) to:
Umbro Teamwear
Umbro House, Lakeside
Cheadle, Cheshire, SK8 3GQ
e-mail: custservice@umbrofootballkits.co.uk

Caring for your Garment All garments may be subject to some discolouring as a result of general wear and staining from only partially washed off substances such as mud and grass. Always adhere to garment care labels and follow as appropriate to minimise any chance of colour loss.
Try to avoid leaving kit bundled together or scrunched up whilst damp. After use, soak in warm water with an appropriate (non chlorine bleach based) detergent for approximately 2 hours prior to machine washing. This process aids in the removal of stains and reduces the chance of colour loss. Do not over fill washing machine as dirt can be re-deposited and seriously diminish colouring.
Umbro will not accept liability for any discolouration derived from foreign elements other than those used in the manufacturing of the material.

Customisation
Please ensure that lettering and numbers are correct before time of printing as Umbro will not accept responsibility for any errors made on your behalf.
Umbro is unable to provide any advice concerning decorative additions other than those it supplies and will not accept responsibility for damaged/discolouration caused by the application of other decorative products.

Transfers and Badge Care
Turn garment inside out and wash on a 40ºc cycle to prevent abrasion and colours running during wash.

Do not use bleaching agents, biological wash powders or spot removers on the garment – this may damage your transfer.
Do not iron directly on transfer, turn shirt inside out– excess heat may damage your transfer
Do not scrub the transfer
Do not dry clean